Integrated Instagram logo stickers (matte)

⚠️ IMPORTANT INFORMATION:

You can write your Instagram in UPPERCASE or lowercase,
👉 Be careful to check the spelling

Once the order is validated, no modification will be possible
exactly as you wrote it when ordering.

Please take the time to re-read carefully before validating.

•  Vehicle: 15 cm sticker, Instagram username with the small logo on the left or integrated into the text.
• Motorcycle helmet: 10 cm sticker, Instagram username with integrated logo, respecting visibility on a smaller surface.

STICKER FEATURES:

Heat resistance

• Withstands temperatures up to 80 °C

High-quality professional vinyl

• Specially designed for automotive

• Excellent durability over time

Resistance to outdoor conditions

• Outdoor durability: up to 3 years

• UV resistant, to rain, to washing and to climatic variations Resistant

Indoor longevity

• Up to 5 years indoors

• Ideal for windows, bodywork and smooth surfaces

• Excellent adhesion

• Clean and tidy finish

• Durable effect without yellowing

Washing instructions

• Avoid directing the high-pressure jet directly onto the edges of the sticker at a very short distance

APPLICATION:

1. Prepare the surface

• Wash and thoroughly degrease the area (water + soap, then isopropyl alcohol if possible)

• Wipe with a clean, dry cloth
  The surface must be clean, dry and smooth

 2. Check the conditions

• Ideal temperature: 15 to 25 °C

• Avoid direct sunlight, wind, cold or humidity.
   Too cold = the sticker won't stick well

 3. Position the sticker (dry)

• Place the sticker without removing the backing paper

• Align it exactly where you want it

• You can hold it with a piece of adhesive tape as a guide

 4. Application method

1. Gently remove the backing paper

2. Apply the sticker from the center outwards

3. Use a soft squeegee or a credit card (with a cloth)

 5. Remove the transfer film

• Wait a few minutes (or longer if wet application)

• Remove the film slowly, flat (low angle)

• If a letter peels off, reposition and re-squeegee

 6. After application

• Do not expose the car to water or washing for 24 to 48 hours

• Avoid high-pressure jets on the area

If you need our Instagram; as.shop.45