Integrated Instagram logo stickers (glossy)

⚠️ IMPORTANT INFORMATION:

You can write your Instagram in UPPERCASE or lowercase ,
👉 Please double-check the spelling

Once the order has been confirmed, no modifications will be possible
exactly as you wrote it when ordering.

Please take the time to reread carefully before validating.

•  Vehicle : 15 cm sticker, Instagram username with the small logo on the left or integrated into the text.
• Motorcycle helmet : 10 cm sticker, Instagram username with integrated logo, ensuring visibility on a smaller surface.

STICKER FEATURES:

Heat resistance

• Withstands temperatures up to 80 °C

High-quality professional vinyl

• Specially designed for automobiles

• Excellent durability over time

Resistance to outdoor conditions

• Outdoor durability: up to 3 years

• to UV , rain , washing and climatic variations Resistant

Indoor longevity

• Up to 5 years indoors

• Ideal for windows , bodywork and smooth surfaces

• Excellent adhesion

• Clean and neat finish

• Durable effect without yellowing

Washing instructions

• Avoid directing the high-pressure jet directly at the edges of the sticker from a very short distance

INSTALLATION:

1. Prepare the surface

• Wash and degrease the area thoroughly (water + soap, then isopropyl alcohol if possible)

• Wipe with a clean, dry cloth
   The surface must be clean, dry, and smooth

 2. Check the conditions

• Ideal temperature: 15 to 25 °C

• Avoid direct sun, wind, cold, or humidity.
  Too cold = the sticker sticks poorly.

 3. Position the sticker (dry application)

• Place the sticker without removing the backing paper

• Align it exactly where you want it.

• You can hold it with a piece of adhesive tape for reference.

 4. Application method

1. Gently remove the backing paper.

2. Apply the sticker from the center outwards.

3. Use a soft squeegee or a bank card (with a cloth).

 5. Remove the transfer film

• Wait a few minutes (or more if wet application).

• Remove the film slowly, flat (low angle).

• If a letter peels off, reapply and use the squeegee again.

 6. After application

• Do not expose the car to water or washing for 24 to 48 hours

• Avoid high-pressure jets on the area.

If you need our Instagram; as.shop.45